Pulsetech 390PT 6V and 12V Battery Tester (741X390) Instrukcja Użytkownika Pobierz pdf (Strona 8)

800-580-75548

CHARGING SYSTEM VOLTAGE LOW WHEN TESTING WITH ACCESSORY LOADS

The alternator is not providing sufﬁcient current for the

system’s electrical loads and the charging current for the

battery. Check the belts to ensure the alternator is rotat-

ing with the engine running. If the belts are slipping or broken, replace the belts and re-

test. Check the connections from the alternator to the battery. If the connection is loose

or heavily corroded, clean or replace the cable and retest. If the belts and connections

are in good working condition, replace the alternator.

CHARGING SYSTEM VOLTAGE NORMAL WHEN TESTED WITH ACCESSORY LOADS

The system is showing normal output from the alternator.

No problem detected.

11. Press «ENTER» when charging system test is completed. Turn all accessory loads and

engine off. Press «ENTER» to return to step 1 or remove the test clamps from the battery

posts after completion of testing to end test.

GLOSSARY

What is a GEL battery?

A gel battery is a lead-acid electric storage battery that:

•issealedusingspecialpressurevalvesandshouldneverbeopened.

•iscompletelymaintenance-free.

•usesthixotropicgelledelectrolyte.

•usesarecombinationreactiontopreventtheescapeofhydrogenandoxygengases

normally lost in a ﬂooded lead-acid battery (particularly in deep cycle applications).

•isnon-spillableandthereforecanbeoperatedinvirtuallyanyposition.However,

upside-down installation is not recommended.

What is an AGM battery?

An AGM battery is a lead-acid electric storage battery that:

•issealedusingspecialpressurevalvesandshouldneverbeopened.

•iscompletelymaintenance-free.

•hasallofitselectrolyteabsorbedinseparatorsconsistingofasponge-likemassof

matted glass ﬁbers.

•usesarecombinationreactiontopreventtheescapeofhydrogenandoxygengases

normally lost in a ﬂooded lead-acid battery (particularly in deep cycle applications).

• is non-spillable, and therefore can be operated in virtually any position. However,

upside-down installation is not recommended.

ALT. LOAD VOLTS

xx.xxV LOW

ALT. LOAD VOLTS

xx.xxV NORMAL

1 2 3 4 5 6 7 8 9

Brak uwag

Pulsetech 390PT 6V and 12V Battery Tester (741X390) Instrukcja Użytkownika Strona 8